Launch CNC602A Injector Cleaner Tester

CNC602A injector cleaner & tester

CNC602A is an advanced electromechanical product, which can clean and test injectors by simulating engine working conditions. It can also perform cleaning on the injectors and fuel supply system on vehicle.

Launch CNC602A Injector Cleaner Tester Feature
 
* Ultrasonic cleaning: To perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely.

* Uniformity/Sprayability test: To test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the help of backlight. This test is also for reverse flush.

* Leakage test: To test the sealing and dribbling conditions of injectors under system pressure.

* Injecting flow test: To check the injecting amount of the injector in 15 seconds of constant injection.

* Auto. test: To test injectors by simulating different working conditions.

* On-vehicle cleaning: The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle.
 

Launch CNC602A Injector Cleaner Tester Specification
 
* Power supply: □AC220V±10%, 50/60Hz;□AC110V±10%, 50/60Hz.

* Input power: 250W;

* Ultrasonic cleaner power: 100W;

* Simulated RPM range: 10～9990rpm; step: 10rpm;

* Time range: 1～9999s;

* Pulse width: 0.5～25ms; step 0.1 ms;

* Fuel tank capacity: 4700ml;

* Dimensions: 385mm×410mm×500mm;

* Weight: About 35kg

you may interest in:auto key programmer,odometer correction tool,Launch X431,Launch X431 Master,Launch X431 diagun,Launch X431 scanner,Launch X431 GX3,Autoboss v30 scanner,Autoboss scanner,Benz Key Maker,BMW Scanner,ad900 key programmer,SBB key programmer,Auto Diagnostic Tool，Auto Key Programmer，Odometer Correction，Auto Code Reader，Diagnostic PC Interface，ECU Chip Tuning，Ecu Programmer，VAG Scanner，BMW Scanner，Airbag Reset，Opel Diagnostic Tools，ELM327，K+CAN Commander